Description
This instrument is a pen style voltage detector that can check jacketed electrical wires and bare wires that use AC voltage in live wire conditions.
- Detection with a loud beep and blinking LED
- Slim, easy-to-hold pen-shaped design
- Sensitivity switchable between HIGH and LOW
- Safety design equipped with a power LED
Specifications
| Detectable Voltage Range |
80 to 600V AC, 50/60Hz HIGH: Works with IV2 mm jacketed electrical wire or equivalent LOW: Works with bare live part |
| Detection Indicator | Red and green LEDs blinks; beep sound |
| Volume | 50 dB or more at 50cm distance from beep emitter |
| Light Intensity | Visible at 50cm distance from light emitting section with light intensity of 8,000 lux |
| Dielectric Strength | 1 min. at 2000V AC, from sensor to grip |
| Low Battery Warning | Beep sounds for 2 seconds when voltage falls below approx. 2.4 V and then power is turned OFF |
| Operating Temperature & Humidity Range | Temperature: –10 °C to 45 °C; Humidity: 80 % RH or less (no condensation) |
| Battery | LR44 (1.5V)x2 |
| Battery Life | Approx. 9 hours of continuous operation (approx. 7 mA during detection, approx. 1.5 mA during standby) or 3 years in Auto Power Off or OFF mode |
| Auto Power Off Mode | Approx. 5 min. since last detection, 2μA TYP |
| Size/Weight | H134 x W20 x D18mm / Approx. 20g |
Downloads
Click to View/Download
You may also like
Recently viewed
- Opens in a new window.