highlight
CE
highlight
True RMS
highlight
PC Link
highlight
CAT II 1000v
highlight
CAT III 600v

PC7000 | Digital Multimeter with True RMS and PC Link

SanwaSKU: PC7000

Price:
Sale price$389.00


True RMS

AC current and voltage of a non-sine wave can be measured by True RMS (Root-Mean-Square) values.

2 Channel Display

Dual channel display allows simultaneous readings.

Continuity Buzzer

The buzzer sounds when the measuring object is electrically conducting.

Frequency in Hertz

Commercial frequencies of 50Hz/60Hz can be measured.

Capacitor

Capacitor capacity (electrostatic capacity) is measured in F (farad), μF, etc.

Duty Cycle

The duty cycle of repeating waveform is indicated on a percentage basis (%).

4-20mA%

4-20mA for sending instrumentation signals. Expresses the current loop of 4mA as 0% and 20mA as 100%

Temperature

Temperature can be measured in ºF or ºC using the optional probe.

dBm

Scaling of voltage values is performed according to the reference impedance into dBm. Convenient for use with audio equipment.

Peak Hold

The peak value like in-rush current is indicated. The minimum pulse width capturable differs according to models.

Low-Pass Filter

Low-pass filter cuts current value of high frequency.

Auto Power Save

The display disappears to bring the device into the power-save state when a certain time has passed after power-up. Some models have a function to cancel this function.

MAX/MIN/AVG

The maximum, minimum and average values are displayed or recorded. The recorded value can be seen later on the display.

Data Hold

A value indicated on the display is fixed even after the test lead is removed, and can be used as a record for reference purposes.

Range Hold

The range is fixed in the measurement of varying voltage and current which is difficult to read in the auto range.

Backlight

Backlit display allows indicator reading in a dark place.

USB Connection

Data can be exported to a PC via USB port and optional cable.

Relative Value

A certain measured value is assumed as 0 and measured values after that are expressed by positive or negative values relative the value fixed as 0.

Customer Reviews

New content loaded

Description

The PC7000 is Sanwa’s top-of-the-line digital multimeter with True RMS, a backlit dual function display and PC Link 7 connectivity.

The PC7000 multitester is designed to measure electrical parameters for home electric appliances, batteries, low power circuit analysis, as well as low-power RF equipment.

It is a "True RMS" multimeter with a maximum display count of 50000 (500000 for DC). It comes with a CAT.II (1000V) rating suitable for measuring single-phase AC loads such as home appliances, and CAT.III (600V) rating suitable for 3-phase distribution. The Auto Range feature allows the user to automatically set the range of the device, users also have the option of adjusting it manually using the dial. It has an accuracy of 0.03% for DC voltages. The High-speed analog bar graph provides a visual indication of measurement like a traditional analog meter needle, its purpose is to visualize varying voltage levels and has up to 41 bar segments.

Users can also use the Dual Function Display which allows them to display 2 functions (max) of the input signal being measured (e.g.: Volts/Hz). It can also display the max, min, and average values of input signals, especially AC signals. The device can measure frequencies of AC sine waves, along with logic frequency measurements. Using the K-type thermocouple sensor, the device can be used to measure temperature readings (range: -50⁰C to 1000⁰C). This device comes with a protective holster, that not only provides a protective housing for the instrument but also prevents the user from accidentally getting shocked while using it.

The instrument is equipped with an optical isolated interface port at the meter back for data communication. Using the PC Link 7 software the users can transfer real-time readings and internally logged data to their PC on a CSV file. The PC Link 7 software can automatically detect a port connected with a digital multimeter with no additional Windows drivers required. The software can support up to 8 channels to the PC at a given time. 

Includes meter, rubber holster, instruction manual, K type temperature sensor and one set of test leads.

  • AC True RMS / 50000 count (500000 count for DCV)
  • 0.03% Accuracy
  • Dual display capability with Backlight to simultaneously display voltage/current/frequency and AC/DC components of voltage/current
  • MAX, MIN, AVE value hold / Data hold / Range hold
  • Current (mA/μA)% 4-20mA measurement
  • Conductance measurement / Capacitance measurement
  • Temperature measurement (with K type thermocouple sensor: -50℃~1000℃)
  • Continuity Test
  • Backlight
  • Auto power save (17 min. after the last operation (cancelable))
  • Size / Mass: H184 x W86 x D52mm / 430g
  • PC Link system (Requires optional optical Link USB cable (KB-USB7) and software (PC Link7) 

Specifications

PC7000

Measuring Range Accuracy Resolution Input Impedance
DCV 500m/5/50/500/1000V ±(0.03%+2) 0.01mV 10MΩ
ACV 500m/5/50/500/1000V ±(0.5%+40) 0.01mV
DCA 500μ/5000μ/50m/500m/5/10A ±(0.1%+20) 0.01μA  
ACA 500μ/5000μ/50m/500m/5/10A ±(0.6%+40) 0.01μA
Resistance 500/5k/50k/500k/5M/50MΩ ±(0.2%+6) 0.01Ω
Conductance 99.99nS ±(1.0%+10) 0.01nS
Capacitance 50n/500n/5μ/50μ/500μ/5m/25mF ±(0.8%+3 ※ 0.01nF
Temperature -50~1000°C
(thermocouple K type)
±(0.3%+20) 0.1°C
Frequency 10Hz~200kHz ±(0.02%+40) 0.001Hz
Logic frequency 5Hz~2MHz ±(0.002%+4) 0.001Hz
Duty cycle 0.1%~99.99% ±(3d/kHz+2) 0.01%
dBm -29.83dBm~54.25dBm ±(0.25dB+2) 0.01dB
4-20mA% 4mA=0%
20mA=100%
±25d 0.01%
Continuity Buzzer sounds at between 20Ω and 200Ω
Open voltage: approx.1.3V
Diode test Open voltage: approx. 3V

Display Numeral display 50000 & 500000 selectable, bar graph 41 segments
Sampling rate 5 times/sec. for 50000 count, 1.25 times/sec.for 500000 count, 60 times/sec.for bar graph
Bandwidth V:45Hz~1kHz,1kHz~20kHz(below 500V)
A:40Hz~1kHz
Fuse 11A/1000V IR20kA Φ10× 38 mm
0.4A/1000V IR30kA Φ 6.3× 32 mm
Battery 6LR61(9V)x1
Battery life Approx. 100h (alkaline battery) at DCV range
Size/Mass H184×W86×D52mm/approx.430g(Including Holster)
Safety IEC61010 CAT.Ⅲ600V/CAT.Ⅱ1000V
*Accuracies with film capacitor or better, which has low leakage current


Videos

Review courtesy of Darren Walker

Downloads

Click to View/Download

You may also like

Recently viewed